Hyundai Cars 2006-2008

Removal & Installation

Print

Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the glove box.
  6.  
  7. Disconnect the recirculation door actuator connector.
  8.  
  9. Loosen the mounting screws fastening the recirculation door actuator.
  10.  
  11. Remove the recirculation door actuator (A) from the blower unit.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Remove the recirculation door actuator (A) from the blower unit

  2.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

The recirculation door (also called the intake actuator) is located on the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

  1. Disconnect the negative battery terminal.
  2.  
  3. Remove the glove box.
  4.  
  5. Disconnect the intake actuator connector.
  6.  
  7. Remove the mounting screws and remove the intake actuator (A) from the blower unit.

    Click image to see an enlarged view

    Fig. Remove the intake actuator (A) from the blower unit

  8.  

To install:

  1. Installation is the reverse order of removal.
  2.  

 
label.common.footer.alt.autozoneLogo