Hyundai Cars 2006-2008

Rear Window Wiper/Washer Systems

Print

Removal & Installation



Wiper Motor

Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the tail gate trim.
  6.  
  7. Detach the wiper cap (A), then remove the rear wiper arm mounting nut (B) and arm.

    Click image to see an enlarged view

    Fig. Remove the wiper cap (A), then remove the nut (B) and the rear wiper arm

  8.  
  9. Remove the wiper motor cover, then remove the mounting nut and rear wiper cap and pad.
  10.  
  11. Detach the rear wiper motor connector (A).
  12.  
  13. Remove the 2 bolts and remove the rear wiper motor (B).

    Click image to see an enlarged view

    Fig. Detach the rear wiper motor connector (A), remove the 2 bolts, and remove the rear wiper motor (B)

  14.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. When installing the wiper cap and pad, make sure the arrow on the cap is pointing upwards. Note the following tightening specifications:
    1. Wiper motor mounting bolts: 5-8 ft. lbs. (7-11 Nm).
    2.  
    3. Wiper arm mounting nut: 7-9 ft. lbs. (10-13 Nm).

      Click image to see an enlarged view

      Fig. When installing the wiper cap and pad (B) and nut (A), make sure the arrow on the cap is pointing upwards

    4.  

  4.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the upper and side trim from the tailgate frame.
  6.  
  7. Remove the tailgate trim panel.
  8.  
  9. Remove the rear wiper arm after removing a nut.
  10.  
  11. Remove the pivot cover and the hexagonal nut.
  12.  
  13. Remove the 3 bolts holding the rear wiper motor.
  14.  
  15. Remove the rear wiper motor.
  16.  
  17. Disconnect the motor's electrical connector.

    Click image to see an enlarged view

    Fig. Remove the rear wiper motor



    Click image to see an enlarged view

    Fig. Rear wiper motor and related components

  18.  

To install:

  1. Connect the motor's electrical connector.
  2.  
  3. Install the rear wiper motor. Tighten the bolts to: 10-13 ft. lbs. (14-17 Nm).
  4.  
  5. Install the pivot cover and the hexagonal nut. Tighten the nut to: 10-13 ft. lbs. (14-17 Nm).
  6.  
  7. Install the rear wiper arm. Tighten the nut to: 10-13 ft. lbs. (14-17 Nm).
  8.  
  9. Install the tailgate trim panel.
  10.  
  11. Install the upper and side trim onto the tailgate frame.
  12.  
  13. Connect the negative battery terminal.
  14.  

Wiper Washer

Specific to:

Hyundai Entourage 2007-2008

The rear wiper washer utilizes the front wiper washer reservoir and a special 2-way pump. To service the motor/pump or wiper washer reservoir, refer to Front Wiper Washer, removal & installation.


WARNING
When servicing the washer pump, be careful not to damage the washer pump seal. Do not operate the washer pump before filling the washer reservoir; to do so could result in premature pump failure.



Click image to see an enlarged view

Fig. Rear wiper washer pump shown combined with the front wiper washer pump

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

The rear wiper washer utilizes the front wiper washer reservoir and a special 2-way pump. To service the motor/pump or wiper washer reservoir, refer to Front Wiper Washer, removal & installation.


WARNING
When servicing the washer pump, be careful not to damage the washer pump seal. Do not operate the washer pump before filling the washer reservoir; to do so could result in premature pump failure.



Click image to see an enlarged view

Fig. Rear wiper washer pump shown combined with the front wiper washer pump

 
label.common.footer.alt.autozoneLogo