Hyundai Cars 2006-2008

Windshield Washer Systems

Print

Removal & Installation



Washer Motor

Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
    WARNING
    When servicing the washer pump, be careful not to damage the washer pump seal. Do not operate the washer pump before filling the washer reservoir; to do so could result in premature pump failure.

  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the front bumper cover.
  6.  
  7. Remove the washer hose, the washer motor connector (A), and washer level sensor connector (C).
  8.  
  9. Remove the washer reservoir (B) after removing 3 bolts.
  10.  
  11. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Remove the washer hose, the washer motor connector (A), and washer level sensor connector (C)

  12.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
    WARNING
    When servicing the washer pump, be careful not to damage the washer pump seal. Do not operate the washer pump before filling the washer reservoir; to do so could result in premature pump failure.

  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the front bumper cover.
  6.  
  7. Remove the washer hose and the washer motor connector (A).

    Click image to see an enlarged view

    Fig. Remove the washer hose and the washer motor connector (A)

  8.  
  9. Remove the washer reservoir bolts.
  10.  
  11. Remove the windshield washer motor and reservoir (A).

    Click image to see an enlarged view

    Fig. Remove the windshield washer motor and reservoir (A)

  12.  

To install:

  1. Install the windshield washer motor and reservoir (A).
  2.  
  3. Before installing the pump motor, check the filter for foreign material or contamination. If necessary, clean the filter.
  4.  
  5. Install the washer motor and connect the washer hose and the motor connector.
  6.  
  7. Install the front bumper cover.
  8.  
  9. Connect the negative battery terminal.
  10.  
  11. Check for the proper operation of the windshield washer system.
  12.  

 
label.common.footer.alt.autozoneLogo