Hyundai Cars 2006-2008

Windshield Wiper Systems

Print

Removal & Installation





Click image to see an enlarged view

Fig. Window wiper and washer system component locations

Wiper Motor

Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the nut, then remove the windshield wiper arm and blade.

    Click image to see an enlarged view

    Fig. Remove the nut, then remove the wiper arm and blade (A)

  6.  
  7. Remove the 4 screws, then remove the weatherstrip and cowl top cover.

    Click image to see an enlarged view

    Fig. Remove the 4 screws, then remove the weatherstrip and cowl top cover (A)

  8.  
  9. Remove the windshield wiper motor and linkage assembly after removing 4 bolts.
  10.  
  11. Disconnect the wiper motor connector (A) and windshield de-icer connector (B) from the wiper motor and linkage assembly.
  12.  
  13. Remove the wiper motor assembly.

    Click image to see an enlarged view

    Fig. After removing the 4 bolts, remove the wiper motor and linkage. Disconnect the wiper motor connector (A) and windshield de-icer connector (B) from the wiper motor and linkage assembly

  14.  

To install:

  1. Installation is the reverse of the removal procedure. Tighten the retainers as follows:
    1. Wiper motor and linkage assembly bolts: 5-8 ft. lbs. (7-11 Nm).
    2.  
    3. Wiper arm and blade bolts: 20-23 ft. lbs. (28-32 Nm).

      Click image to see an enlarged view

      Fig. Exploded view of front window wiper components

    4.  

  2.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Detach the wiper cap.
  4.  
  5. Remove the windshield wiper arm attaching nut (A).
  6.  
  7. Remove the windshield wiper arm and blade.

    Click image to see an enlarged view

    Fig. Windshield wiper arm and blade diagram

  8.  
  9. Remove the weatherstrip.
  10.  
  11. Remove the cowl top cover (A) after removing 3 screws (B).

    Click image to see an enlarged view

    Fig. Cowl top cover diagram

  12.  
  13. Remove 2 bolts from the windshield wiper motor and linkage assembly.
  14.  
  15. Remove the windshield wiper motor and linkage assembly.
  16.  
  17. Disconnect the wiper motor connector (A) and windshield deicer connector (B) from the wiper motor and the linkage assembly.

    Click image to see an enlarged view

    Fig. Wiper motor and linkage assembly diagram

  18.  
  19. Installation is the reverse of removal.
  20.  
  21. Tighten the windshield wiper arm to 20-24 ft. lbs. (28-33 Nm).
  22.  
  23. Tighten the windshield wiper motor bolts to 61-96 inch lbs. (7-11 Nm).
  24.  

 
label.common.footer.alt.autozoneLogo