Hyundai Coupes/Sedans 1986-1993 Repair Guide

ABS System Relay

Print

TESTING



  1. Remove the relay from its mount and disconnect the harness.
  2.  
  3. Use an ohmmeter to check continuity. There should be no continuity between terminals 1 and 5. Continuity should exist between terminals 2 and 4.
  4.  
  5. Apply 12 volts to pin 2 and ground pin 4. With power applied, continuity should be found across terminals 1 and 5.
  6.  
  7. If any test condition is not met, the relay must be replaced.
  8.  

 
label.common.footer.alt.autozoneLogo