Hyundai Coupes/Sedans 1986-1993 Repair Guide

Electronic Control Unit (ALCU)

Print

REMOVAL & INSTALLATION



  1. Ensure that the ignition switch is OFF throughout the procedure.
  2.  
  3. Disconnect the multi-pin connector from the control unit.
  4.  
  5. Remove the 4 retaining bolts and remove the control unit from the left fenderwell
  6.  

To install:
  1. Place the control unit in position and tighten the retaining bolts.
  2.  
  3. Connect the multi-pin connector and secure.
  4.  
  5. Turn ignition switch ON and verify operation of control unit.
  6.  

 
label.common.footer.alt.autozoneLogo