Hyundai Coupes/Sedans 1986-1993 Repair Guide

Back-Up Light Switch



The switch is screwed into the right side of the transaxle case and is replaceable, but not adjustable. To remove the switch, disconnect the wiring harness and unscrew the switch from the transaxle case. Do not remove the steel ball from the switch mounting bore. If it falls out, make sure that you retrieve it and put it back. Install the new switch in reverse of the removal procedure using a new gasket. Torque the switch to 22-25 ft. lbs. (29-33 Nm). Check the new switch for proper operation.