Hyundai Coupes/Sedans 1994-1998 Repair Guide

Power Transistor

Print

See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: To check the power transistor for cylinders No. 1-No. 4, connect the power source to terminals 3-4 and check for continuity at terminals 3-5



Click image to see an enlarged view

Fig. Fig. 2: To check the power transistor for cylinders No. 1-No. 4, connect the power source to terminals 2-3 and check for continuity at terminals 1-3

  1. Disconnect the power transistor electrical connector.
  2.  
  3. Check for continuity on the cylinders No. 1-No. 4 power transistor.
    1. Connect the negative terminal of a 1.5 volt power supply (battery) to terminal 3 of the power transistor.
    2.  
    3. Connect the positive terminal of a 1.5 volt power supply to terminal 4 of the power transistor.
    4.  
    5. Connect an ohmmeter across terminals 3 and 5 (with the negative ohmmeter lead on terminal 5) of the power transistor connector.
    6.  
    7. With 1.5 volts applied, there should be continuity between terminals 3 and 5 of the power transistor connector.
    8.  

  4.  
  5. Check for continuity on the cylinders No. 2-No. 3 power transistor.
    1. Connect the negative terminal of a 1.5 volt power supply (battery) to terminal 3 of the power transistor.
    2.  
    3. Connect the positive terminal of a 1.5 volt power supply to terminal 2 of the power transistor.
    4.  
    5. Connect an ohmmeter across terminals 1 and 3 (with the negative ohmmeter lead on terminal 1) of the power transistor connector.
    6.  
    7. With 1.5 volts applied, there should be continuity between terminals 1 and 3 of the power transistor connector.
    8.  

  6.  
  7. Disconnect the 1.5 volt power supply from the power transistor connector.
  8.  
  9. Check for continuity again. Continuity should not exist.
  10.  
  11. If the power transistor does not respond as stated, it should be replaced.
  12.  

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the power transistor electrical harness.
  4.  
  5. Remove the power transistor mounting bolts.
  6.  
  7. Carefully remove the power transistor from the engine.
  8.  

To Install:
  1. Install the power transistor on the engine.
  2.  
  3. Install the mounting bolt and tighten to securely.
  4.  
  5. Connect the power transistor electrical harness.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo