Hyundai Coupes/Sedans 1994-1998 Repair Guide

Instrument Panel

Print

REMOVAL & INSTALLATION



Except Sonata

See Figures 1 through 12



Click image to see an enlarged view

Fig. Fig. 1: Instrument panel assembly- Excel



Click image to see an enlarged view

Fig. Fig. 2: Lower instrument panel screw locations- Excel



Click image to see an enlarged view

Fig. Fig. 3: Upper instrument panel screw locations- Excel



Click image to see an enlarged view

Fig. Fig. 4: Instrument panel assembly-Scoupe



Click image to see an enlarged view

Fig. Fig. 5: Instrument panel screw locations-Scoupe



Click image to see an enlarged view

Fig. Fig. 6: Instrument panel assembly-1994-95 Elantra



Click image to see an enlarged view

Fig. Fig. 7: Instrument panel assembly-1996-98 Elantra



Click image to see an enlarged view

Fig. Fig. 8: Instrument panel screw locations-1996-98 Elantra



Click image to see an enlarged view

Fig. Fig. 9: Instrument panel assembly-Accent



Click image to see an enlarged view

Fig. Fig. 10: Instrument panel screw locations-Accent



Click image to see an enlarged view

Fig. Fig. 11: Instrument panel assembly-Tiburon



Click image to see an enlarged view

Fig. Fig. 12: Instrument panel screw locations-Tiburon

  1. Remove the steering wheel.
  2.  
  3. Remove the upper and lower steering column shrouds.
  4.  
  5. Remove the hood release handle mounting screws.
  6.  
  7. Remove the lower fascia panel.
  8.  
  9. Remove the side lower crash pad.
  10.  
  11. Remove the glove box.
  12.  
  13. Remove the main lower crash pad.
  14.  
  15. Pull the instrument cluster forward disconnect all the electrical wiring and the speedometer cable.
  16.  
  17. Remove the heater control assembly.
  18.  
  19. Remove the front speaker grille from the main crash pad.
  20.  
  21. Remove the front speaker.
  22.  
  23. Remove the six retaining screws and remove the main crash pad from it's mounting brackets.
  24.  

To install:
  1. Position the main crash pad onto the mounting brackets and install and tighten the six retaining screws.
  2.  
  3. Install the front speaker.
  4.  
  5. Install the front speaker grille into the main crash pad.
  6.  
  7. Install the heater control assembly.
  8.  
  9. Connect the speedometer cable and the electrical wiring to the rear of the instrument cluster and install the cluster not the main crash pad.
  10.  
  11. Install the lower main crash pad.
  12.  
  13. Install the glove box.
  14.  
  15. Install the side lower crash pad.
  16.  
  17. Install the lower fascia panel.
  18.  
  19. Install the hood release handle screws.
  20.  
  21. Install the steering wheel column shrouds.
  22.  
  23. Install the steering wheel.
  24.  
  25. Check all instrument panel functions to make sure they work properly.
  26.  

Sonata

See Figures 13 and 14



Click image to see an enlarged view

Fig. Fig. 13: Instrument panel assembly-Sonata



Click image to see an enlarged view

Fig. Fig. 14: Instrument panel screw locations-Sonata

  1. Remove the steering wheel.
  2.  
  3. Remove the steering column upper and lower shrouds.
  4.  
  5. Remove the hood release handle.
  6.  
  7. Remove the side lower crash pad.
  8.  
  9. Remove the fuse box mounting screws and allow the fuse box and wiring to dangle.
  10.  
  11. Empty and remove the glove box.
  12.  
  13. Remove the lower crash pad center fascia panel.
  14.  
  15. Remove the radio and disconnect the electrical connector.
  16.  
  17. Remove the lower crash pad center skin.
  18.  
  19. Remove the main lower crash pad.
  20.  
  21. Remove the four steering column mounting bracket bolts and lower the steering column from its normal operating position.
  22.  
  23. Remove the cluster assembly and disconnect the electrical connectors.
  24.  
  25. Remove the air conditioner control assembly.
  26.  
  27. Remove the front speaker grille from the main crash pad.
  28.  
  29. Remove the front speaker.
  30.  
  31. Disconnect the defroster nozzle upper center cover from the main crash pad.
  32.  
  33. Remove the main crash pad.
  34.  

To install:
  1. Install the main crash pad.
  2.  
  3. Connect the defroster nozzle upper center cover to the main crash pad.
  4.  
  5. Install the front speaker and speaker grille into the main crash pad.
  6.  
  7. Install the air conditioner control assembly.
  8.  
  9. Connect the electrical connectors to the rear of the cluster assembly and install it.
  10.  
  11. Raise the steering wheel from the lowered position and install the four steering column mounting bracket bolts.
  12.  
  13. Install the main lower crash pad.
  14.  
  15. Connect the wiring to the radio and install.
  16.  
  17. Install the lower crash pad fascia panel.
  18.  
  19. Install the glove box.
  20.  
  21. Raise the fuse box and wiring into place and install the fuse box mounting screws.
  22.  
  23. Install the lower side crash pad.
  24.  
  25. Install the hood release handle.
  26.  
  27. Install the upper and lower steering column shrouds.
  28.  
  29. Install the steering wheel.
  30.  

 
label.common.footer.alt.autozoneLogo