Hyundai Coupes/Sedans 1994-1998 Repair Guide

Headlight Housing

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3



Click image to see an enlarged view

Fig. Fig. 1: The headlight housing is retained by screws located behind the grille, so the grille must be removed



Click image to see an enlarged view

Fig. Fig. 2: The parking lamp is usually retained by a single screw. It must be removed to gain access to the headlight housing outer screws



Click image to see an enlarged view

Fig. Fig. 3: The headlight housing is retained by several screws

  1. Remove the grille.
  2.  
  3. Remove the screws that retain the turn signal/marker lamp housing and remove the housing.
  4.  
  5. Remove the screws that retain the headlight housing and remove the housing.
  6.  
  7. Installation is the reverse of removal.
  8.  
  9. When installing the housing be careful not to overtighten the screws.
  10.  
  11. Check the headlight alignment.
  12.  

 
label.common.footer.alt.autozoneLogo