Hyundai Coupes/Sedans 1994-1998 Repair Guide

Back-Up Light Switch

Print

REMOVAL & INSTALLATION



The switch is screwed into the side of the transaxle case and is replaceable, but not adjustable.

  1. Disconnect the wiring harness.
  2.  
  3. Unscrew the switch from the transaxle case.
  4.  

Do not remove the steel ball from the switch mounting bore.

  1. Install the new switch and tighten to 22-25 ft. lbs. (29-33 Nm).
  2.  
  3. Check the new switch for proper operation.
  4.  

 
label.common.footer.alt.autozoneLogo