Hyundai Coupes/Sedans 1994-1998 Repair Guide

Multifunction Switch

Print

REMOVAL & INSTALLATION



Without Air Bag

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Steering column assembly-without air bag

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the steering wheel.
  4.  
  5. Remove the steering column covers.
  6.  
  7. Disconnect the horn electrical harness.
  8.  
  9. Remove the electrical harness retainers.
  10.  
  11. Remove the retaining screws and slide the switch off the steering column.
  12.  

To install:
  1. Install the multifunction switch and tighten retaining screws securely.
  2.  
  3. Install the electrical harness retainers.
  4.  
  5. Connect the horn electrical harness.
  6.  
  7. Install the steering column covers.
  8.  
  9. Install the steering wheel.
  10.  
  11. Connect the negative battery cable.
  12.  

With Air Bag

See Figure 2



Click image to see an enlarged view

Fig. Fig. 2: Steering column assembly-without air bag

  1. Turn the steering wheel to the straight ahead position.
  2.  
  3. Disconnect the negative battery cable.
  4.  

Wait at least 30 seconds prior to start of service. This disables the air bag system.

  1. Remove the air bag module.
  2.  
  3. Disconnect the air bag and horn electrical harnesses.
  4.  
  5. Remove the steering wheel.
  6.  
  7. Remove the steering column upper and lower shrouds.
  8.  
  9. Remove the clock spring.
  10.  
  11. Remove the multifunction switch assembly.
  12.  

To install:
  1. Install the multifunction switch assembly.
  2.  
  3. Align the mating mark and neutral position indicator of the clock spring.
  4.  
  5. Ensure the front wheels are in the straight ahead position.
  6.  
  7. Install the clock spring.
  8.  
  9. Install the steering column upper and lower shrouds.
  10.  
  11. Install the steering wheel.
  12.  
  13. Connect the air bag and horn electrical harnesses.
  14.  
  15. Install the air bag module.
  16.  
  17. Connect the negative battery cable.
  18.  

 
label.common.footer.alt.autozoneLogo