Hyundai Santa Fe 2001-05

Adjustments

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Measure the clutch pedal height from the face of the pedal pad to the floorboard. The proper measurement (8.597 inch (218.9mm).
  4.  
  5. Measure the clutch pedal clevis pin play. The measurement should be 0.04-0.11 inch (1-3mm).
  6.  
  7. Adjust the height and clevis pin if necessary as follows:
    1. Turn and adjust the bolt, then secure it by tightening the lock nut.
    2.  

  8.  


NOTE
After adjustment, tighten the bolt until it reaches the pedal stopper and tighten the lock nut.

  1. Turn the push rod until the proper specification is reached and tighten the lock nut.
  2.  


NOTE
When adjusting the clevis pin play or the pedal height, make sure not to push the push rod towards the master cylinder.

  1. After the adjustments are made, check that the clutch pedal free play is 0.2-0.5 inch (6-13mm). The free play is measured at the face of the pedal pad
  2.  

  1. If the adjustments do not bring the pedal into specifications, check the hydraulic system for air or a faulty component.
  2.  

The type of clutch system for this vehicle is hydraulic and as such does not have any adjustments.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Measure the clutch pedal height from the face of the pedal pad to the floorboard. The proper measurement (8.597 inch (218.9mm).
  4.  
  5. Measure the clutch pedal clevis pin play. The measurement should be 0.04-0.11 inch (1-3mm).
  6.  
  7. Adjust the height and clevis pin if necessary as follows:
    1. Turn and adjust the bolt, then secure it by tightening the lock nut.
      NOTE
      After adjustment, tighten the bolt until it reaches the pedal stopper and tighten the lock nut.

    2.  
    3. Turn the push rod until the proper specification is reached and tighten the lock nut.
      NOTE
      When adjusting the clevis pin play or the pedal height, make sure not to push the push rod towards the master cylinder.

    4.  
    5. After the adjustments are made, check that the clutch pedal free play is 0.2-0.5 inch (6-13mm). The free play is measured at the face of the pedal pad
    6.  

  8.  
  9. If the adjustments do not bring the pedal into specifications, check the hydraulic system for air or a faulty component.
  10.  

 
label.common.footer.alt.autozoneLogo