Hyundai Santa Fe 2001-05

Master Cylinder

Print

Removal & Installation




NOTE
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.

  1. Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
  2.  
  3. Clamp the clutch master cylinder hose (A). If there is no enough room for clamping, you can also clamp the hose (B) from the brake master cylinder side.

    Click image to see an enlarged view

    Fig. Clamping of clutch master cylinder hose diagram

  4.  
  5. Disconnect the hose from the cylinder by releasing the clutch master cylinder clamp.
  6.  
  7. Remove the clip (A) and disconnect the clutch tube (B).

    Click image to see an enlarged view

    Fig. Clutch tube location

  8.  
  9. Remove the pin and washer which connect the clutch pedal with the clutch master cylinder.
  10.  
  11. After loosening the clutch master cylinder assembly mounting bolts under the driver's seat, remove the clutch master cylinder. It can be helpful to do this step after removing the clutch pedal mounting bracket.
  12.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo