Hyundai Santa Fe 2001-05

Removal & Installation

Print

  1. Drain the coolant to a level below the bottom of the sensor.
  2.  
  3. Disconnect the ground cable from the battery and then remove the sensor connector.
  4.  
  5. Remove the coolant sensor.
  6.  
  7. To install, reverse the removal procedure and tighten the sensor to 14-29 ft. lbs. (20-40 Nm).
  8.  

  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the connector from the sensor.
  4.  
  5. Drain the cooling system, as required.
  6.  
  7. Remove the sensor from its mounting.
  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo