Hyundai Santa Fe 2001-05

Upper Control Arms

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Upper ball joint
     
    Upper control arm mounting bolts
     
    Upper control arm
     

  4.  

To install:

  1. Install or connect the following:

    Upper control arm and torque the front bolt to 74-89 ft. lbs. (100-120 Nm). Tighten the rear bolt to 103-118 ft. lbs. (140-160 Nm).
     
    Upper ball joint and torque the nut to 74-89 ft. lbs. (100-120 Nm)
     
    Stabilizer bar link and torque the nut to 25-33 ft. lbs. (35-45 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

 
label.common.footer.alt.autozoneLogo