Hyundai Santa Fe 2001-05

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Disconnect the negative battery cable.
  6.  
  7. Remove the two fitting nuts while holding the filter.
  8.  
  9. Remove the filter mounting bolts and the filter from the clamp.
  10.  
  11. Installation is the reverse of removal. Tighten the fitting nuts to 22-29 ft. lbs. (30-40 Nm).
  12.  
  13. Connect the negative battery cable.
  14.  
  15. Start the engine and check for leaks.
  16.  

The fuel filter is part of the fuel pump assembly located in the tank.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Disconnect the negative battery cable.
  6.  
  7. Remove the two fitting nuts while holding the filter.
  8.  
  9. Remove the filter mounting bolts and the filter from the clamp.
  10.  

To install:

  1. Installation is the reverse of removal. Tighten the fitting nuts to 22-29 ft. lbs. (30-40 Nm).
  2.  
  3. Connect the negative battery cable.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo