Hyundai Santa Fe 2001-05

Removal & Installation

Print

  1. Loosen the bolt fixing the wiring bracket, and then move the wiring sideward.
  2.  
  3. Remove the pressure hose from the oil pump, and then disconnect the suction hose from the suction connector and drain the fluid into a container.
  4.  
  5. Loosen the tension adjusting bolt on the power steering "V" belt.
  6.  
  7. Remove the "V" belt from the power steering oil pump pulley.
  8.  
  9. Loosen the power steering oil pump mounting bolt and the tension adjusting bolt, and then remove the steering oil pump assembly.
  10.  
  11. Remove the power steering oil pump mounting bracket.
  12.  
  13. Installation is the reverse of the removal procedure.
  14.  

 
label.common.footer.alt.autozoneLogo