Hyundai Santa Fe 2001-05

Axle Assembly

Print

Removal & Installation



  1. Drain the differential gear oil.
  2.  
  3. Remove the rear drive shaft.
  4.  
  5. Remove the propeller shaft.
  6.  
  7. Support the differential assembly (B) with the jack (A).

    Click image to see an enlarged view

    Fig. Jack placement diagram

  8.  
  9. Disconnect the coupling control connector (A).

    Click image to see an enlarged view

    Fig. Coupling control connector

  10.  
  11. After loosening the differential mounting bolts (A), remove the differential (B).

    Click image to see an enlarged view

    Fig. Differential

  12.  
  13. After loosening the cover bolts (A), remove the differential cover (B).

    Click image to see an enlarged view

    Fig. Differential cover

  14.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo