Hyundai_Tucson_2005

CV-Joint Boots

Print

Inspection



  1. Check the Double Offset Joint (DOJ) outer race, inner race, cage and balls for rust or damage.
  2.  
  3. Check splines for wear.
  4.  
  5. Check for tears, water, foreign matter, or rust in the Birfield Joint (BJ) boot.
  6.  
  7. Check the DOJ boot for tears, cuts or holes.
    CAUTION
    When the Birfield Joint assembly is to be reused, do not wipe away the grease. Check that there are no foreign substances in the grease. If necessary, clean the Birfield Joint assembly and replace grease.

  8.  

  1. Check the Double Offset Joint (DOJ) outer race, inner race, cage and balls for rust or damage.
  2.  
  3. Check splines for wear.
  4.  
  5. Check for tears, water, foreign matter, or rust in the Birfield Joint (BJ) boot.
  6.  
  7. Check the DOJ boot for tears, cuts or holes.
    CAUTION
    When the Birfield Joint assembly is to be reused, do not wipe away the grease. Check that there are no foreign substances in the grease. If necessary, clean the Birfield Joint assembly and replace grease.

  8.  

 
label.common.footer.alt.autozoneLogo