Hyundai_Tucson_2005

TroubleCodes (11 of 11)

Print

2.7L V6 - Auto



Trouble Code: P0665

Intake Manifold Tuning Valve Control Circuit High (Bank 1) Solenoid Type

Trouble Code Conditions: DTC is set if the ECM detects that the valve control circuit is open or shorted to battery voltage. Driver stage check.

Possible Causes:



Open or short to battery in control harness
 
Contact resistance in connectors
 
Faulty valve
 

Trouble Code: P0700

Transmission Control System Signal

Trouble Code Conditions: Key on or engine running, and the PCM received a signal from the TCM that indicating an internal problem with the TCM had occurred.

Possible Causes:



Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the TCM may have failed.
 

Trouble Code: P1505

Idle Charge Actuator Signal Low of Coil #1

Trouble Code Conditions: The PCM sets a DTC if the ICAV (open) control circuit is open or short to ground. Driver stage check.

Possible Causes:



Open or short to ground in harness
 
Contact resistance in connectors
 
Faulty ICA valve
 

Trouble Code: P1506

Idle Charge Actuator Signal High of Coil #1

Trouble Code Conditions: The PCM sets a DTC if the ICAV (open) control circuit is short to battery. Driver stage check.

Possible Causes:



Short to battery in harness
 
Contact resistance in connectors
 
Faulty ICA valve
 

Trouble Code: P1507

Idle Charge Actuator Signal Low of Coil #2

Trouble Code Conditions: The PCM sets a DTC if the ICAV (open) control circuit is open or short to ground. Driver stage check.

Possible Causes:



Open or short to ground in harness
 
Contact resistance in connectors
 
Faulty ICA valve
 

Trouble Code: P1508

Idle Charge Actuator Signal High of Coil #2

Trouble Code Conditions: The PCM sets a DTC if the ICAV (open) control circuit is short to battery. Driver stage check.

Possible Causes:



Short to battery in harness
 
Contact resistance in connectors
 
Faulty ICA valve
 

 
label.common.footer.alt.autozoneLogo