Hyundai_Tucson_2005

Lower Control Arm

Print

Control Arm Bushing Replacement



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the lower control arm from the vehicle.
  4.  
  5. Press the front bushing out of the control arm.
  6.  

To install:

  1. Lubricate the front bushing with soap and press into the control arm.
  2.  
  3. Install the control arm to the vehicle.
  4.  
  5. Check and/or adjust the wheel alignment.

    Click image to see an enlarged view

    Fig. Install the bushings in the orientation shown

  6.  

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Lower ball joint
     
    Lower control arm mounting bolts
     
    Lower control arm
     

  4.  

To install:

  1. Install or connect the following:

    Lower control arm and torque the front bolt to 74-89 ft. lbs. (100-120 Nm). Tighten the rear bolt to 103-118 ft. lbs. (140-160 Nm).
     
    Lower ball joint and torque the nut to 74-89 ft. lbs. (100-120 Nm)
     
    Stabilizer bar link and torque the nut to 25-33 ft. lbs. (35-45 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

 
label.common.footer.alt.autozoneLogo