Hyundai_Tucson_2005

Strut (MacPherson Strut) & Coil Spring

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Brake hose bracket
     
    Speed sensor
     
    Stabilizer bar link mounting nut
     
    Upper strut mounting nuts
     
    Lower strut mounting bolts
     
    Strut assembly
     

  4.  

To install:

  1. Install or connect the following:

    Strut assembly and tighten the lower mounting bolts to 103-118 ft. lbs. (140-160 Nm).
     
    Upper strut mounting bolts. Front struts: Tighten to 33-44 ft. lbs. (45-60 Nm). Rear struts: Tighten to 22-30 ft. lbs. (30-40 Nm).
     
    Stabilizer bar link mounting nut. Tighten to 74-89 ft. lbs. (100-120 Nm).
     
    Speed sensor
     
    Brake hose bracket
     
    Front wheel
     

  2.  
  3. Check the alignment and adjust as necessary.
  4.  

 
label.common.footer.alt.autozoneLogo