If accidental system discharge occurs, ventilate work area before resuming service. Additional health and safety information may be obtained from the refrigerant and lubricant manufacturers.
Connect a R-134a refrigerant recover/recycling/charging station (A) to the high-pressure service port (B) and the low-pressure service port (C), as shown, following the equipment manufacturers instructions.
- Add the same amount of new refrigerant oil to the system that was removed during recovery. Use only ND-OIL8 refrigerant oil.
- Charge the system with the specified amount of R-134a refrigerant. Do not overcharge the system; the compressor will be damaged.
- Refrigerant capacity: 1.1245 pounds plus or minus 0.056 pounds.