Hyundai_Tucson_2005

Wheel Bearings

Print

Adjustment



The wheel bearings are sealed units and not adjustable.

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Rear wheel
     
    Brake caliper and rotor
     
    Wheel speed sensor, if equipped
     
    Hub cap
     
    Hub bearing nut and washer
     
    Hub assembly
     

  4.  

To install:

  1. Install or connect the following:

    Hub and bearing assembly to the backing plate. Torque the hub bearing nut to 148-192 ft. lbs. (200-260 Nm).
     
    Hub cap
     
    Wheel speed sensor, if equipped
     
    Brake caliper and rotor
     
    Rear wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo