ION 2006-2007

Slave (Actuator) Cylinder

Print

Removal & Installation



  1. Remove the transaxle.
  2.  
  3. Remove the hydraulic line from the slave cylinder.
  4.  
  5. Remove the hydraulic line from the slave cylinder.
  6.  

To install:

Click image to see an enlarged view

Fig. The removal and installation of the slave cylinder

  1. Install the slave cylinder. Use LOCTITE 592® P/N 21485278 thread sealant on the screws.
  2.  
  3. Tighten the slave cylinder fasteners to 89 inch lbs. (10 Nm).
  4.  
  5. Connect the hydraulic line to the slave cylinder.
  6.  
  7. Bleed the slave cylinder. Refer to Clutch Slave Cylinder Bleeding.
  8.  
  9. Install the transaxle.
  10.  

 
label.common.footer.alt.autozoneLogo