ION 2006-2007

Crankshaft Damper (Balancer)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Drive belt
     
    Using harmonic balancer holder J 38122-A to prevent the crankshaft from rotating and remove the balancer bolt and discard
     
    Crankshaft balancer
     

  4.  

To install:

  1. Install or connect the following:

    Crankshaft balancer
     
    Balancer bolt and using tool J 38122-A to prevent the crankshaft from rotating, install a new balancer bolt and tighten to 74 ft. lbs. (100 Nm) plus an additional 75 degrees
     
    Drive belt
     
    Negative battery cable

    Click image to see an enlarged view

    Fig. Using harmonic balancer holder J 38122-A to prevent the crankshaft from rotating-ION models engine

     

  2.  

 
label.common.footer.alt.autozoneLogo