ION 2006-2007

Flywheel

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the transaxle assembly.
  6.  
  7. If equipped with a manual transaxle, remove the clutch assembly.
  8.  
  9. If equipped with a manual transaxle, remove the flywheel-to-crankshaft bolts and the flywheel. If equipped with an automatic transaxle, remove the flexplate-to-crankshaft bolts and the flexplate. Remove the flexplate shims, if equipped.
  10.  

To install:

  1. Installation is the reverse of the removal procedure. If equipped with a manual transaxle, tighten the flywheel bolts to 59 ft. lbs. (80 Nm). If equipped with an automatic transaxle, tighten the flexplate bolts to 44 ft. lbs. (60 Nm).
  2.  

 
label.common.footer.alt.autozoneLogo