ION 2006-2007

Supercharger

Print

Removal & Installation



2.0L Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the drive belt.
  6.  
  7. Remove the Evaporative Emission (EVAP) tube and EVAP valve.
  8.  
  9. Remove the throttle body and gasket.
  10.  
  11. Remove the Supercharger Inlet Pressure (SCIP) sensor.
  12.  
  13. Disconnect the vacuum brake booster hose.
  14.  
  15. Remove the intercooler fill neck bracket bolts.
  16.  
  17. Remove the supercharger.
  18.  
  19. Remove the gasket if damaged.

    Click image to see an enlarged view

    Fig. The removal and installation of the supercharger-2.0L Engine

  20.  

To install:

  1. Install the supercharger gasket.
  2.  
  3. Install the supercharger and bolts. Tighten the bolts to 18 ft. lbs. (25 Nm).
  4.  
  5. Install the intercooler fill neck bracket bolts and tighten to 89 inch lbs. (10 Nm).
  6.  
  7. Connect the vacuum brake booster hose.
  8.  
  9. Install the SCIP sensor and bolt and tighten to 89 inch lbs. (10 Nm).
  10.  
  11. Install the throttle body.
  12.  
  13. Install the EVAP tube and EVAP valve.
  14.  
  15. Install the drive belt.
  16.  
  17. Connect the negative battery cable.
  18.  

 
label.common.footer.alt.autozoneLogo