ION 2006-2007

Multi-Function (Combination) Switch

Print

Removal & Installataion



  1. Remove the steering column trim covers.
  2.  
  3. Disconnect the multifunction turn signal switch harness connector.
  4.  
  5. Remove the multifunction turn signal switch retaining screws.
  6.  
  7. Remove the multifunction turn signal switch from the steering column.
  8.  

To install:

Click image to see an enlarged view

Fig. The removal and installation of the multifunction turn signal switch

  1. Install the multifunction turn signal switch to the steering column, and tighten the multifunction turn signal switch screws to 17 inch lbs. (2 Nm).
  2.  
  3. Connect the multifunction turn signal switch harness connector.
  4.  
  5. Install the steering column trim covers.
  6.  

 
label.common.footer.alt.autozoneLogo