ION 2006-2007

Shock Absorbers

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the wheel
  4.  
  5. Support the rear axle with a tall jack stand near the shock absorber
  6.  
  7. Remove the upper and lower shock bolts.
  8.  
  9. Remove the shock from the vehicle
  10.  

To install:

  1. Installation is the reverse of removal. Tighten the upper bolt to 66 ft. lbs. (90 Nm) and the lower bolt to 81 ft. lbs. (110 Nm).
  2.  

 
label.common.footer.alt.autozoneLogo