ION 2006-2007

Windshield Wiper Systems

Print

Removal & Installation



Wiper Motor
  1. Remove the wiper arm nut cover.
  2.  
  3. Remove the wiper arm nut and arm.
  4.  
  5. Remove the air inlet grille panel.
  6.  
  7. Disconnect the wiring connector from the wiper motor.
  8.  
  9. Remove the fasteners attaching the wiper module to the plenum.
  10.  
  11. Remove the wiper module assembly from the plenum.
  12.  
  13. Remove the wiper crank arm nut. Remove the wiper crank arm from the wiper motor.
  14.  
  15. Remove the wiper motor screws.
  16.  
  17. Remove the wiper motor from the wiper drive system module.
  18.  

To install:

  1. Position the wiper motor to the wiper drive system module.
  2.  
  3. Install the wiper motor screws and tighten to 71 in. lbs. (8 Nm).
  4.  
  5. Install the wiper motor crank arm and crank arm nut. Tighten the fasteners to 18 ft. lbs. (25 Nm).
  6.  
  7. Install the wiper module assembly into the plenum.
  8.  
  9. Install the fasteners attaching the wiper module assembly to the plenum. Tighten the fasteners to 89 in. lbs. (10 Nm).
  10.  
  11. Connect the wiring connector to the wiper motor.
  12.  
  13. Install the air inlet grille panel.
  14.  
  15. Install the wiper arms.
  16.  

 
label.common.footer.alt.autozoneLogo