ION, L-Series, S-Series 1999-2005

Arming The System

Print

After the repairs, enable the system as follows:

  1. Turn the ignition switch to the LOCK position.
  2.  
  3. Engage the yellow 2-way connector at the base of the steering column, then install the CPA device.
  4.  
  5. Reinstall the Supplemental Inflatable Restraint (SIR) or AIR BAG fuse.
  6.  
  7. Turn the ignition switch to the RUN position.
  8.  
  9. Verify the SIR indicator light flashes 7-9 times, if not, inspect the system for malfunction.
  10.  

After the repairs, enable the system as follows:

  1. Turn the ignition switch to the LOCK position and remove the key.
  2.  
  3. Connect the pre-tensioner and install the CPA.
  4.  
  5. Install the headliner.
  6.  
  7. Connect the roof rail module and install the CPA.
  8.  
  9. Install the garnish molding.
  10.  
  11. Reinstall the Supplemental Inflatable Restraint (SIR) or AIR BAG fuse.
  12.  
  13. Turn the ignition switch to the RUN position.
  14.  
  15. Verify the SIR indicator light flashes 7 times, if not, inspect the system for malfunction.
  16.  

After the repairs, enable the system as follows:

  1. Turn the ignition switch to the LOCK position and remove the key.
  2.  
  3. Connect the pre-tensioner and install the CPA.
  4.  
  5. Install the headliner.
  6.  
  7. Connect the roof rail module and install the CPA.
  8.  
  9. Install the garnish molding.
  10.  
  11. Reinstall the Supplemental Inflatable Restraint (SIR) or AIR BAG fuse.
  12.  
  13. Turn the ignition switch to the RUN position.
  14.  
  15. Verify the SIR indicator light flashes 7 times, if not, inspect the system for malfunction.
  16.  

 
label.common.footer.alt.autozoneLogo