ION, L-Series, S-Series 1999-2005

Removal & Installation

Print

  1. Pull out on the accessory trim plate in order to release the retaining fasteners.
  2.  
  3. Disconnect the accessory trim plate electrical connector(s).
  4.  
  5. Remove the screws from the radio and pull the radio out.
  6.  
  7. Disconnect the radio electrical connectors and remove the radio.
    NOTE
    Do not bend the mode and temperature cables.

  8.  
  9. Disconnect the mode and temperature cables from the HVAC control assembly.
  10.  
  11. Disconnect the HVAC control assembly electrical connectors.
  12.  
  13. Remove the HVAC control assembly screws and remove the HVAC control assembly.
    NOTE
    Do not bend the temperature cable.

  14.  
  15. Remove the temperature or mode control cable screw and remove the temperature cable.
  16.  

To install:

  1. Install the temperature or mode control cable. Make certain that the cable is properly seated in the notches in the HVAC module.
  2.  
  3. Install the cable screw.
  4.  
  5. Install the HVAC control assembly and tighten the screws.
  6.  
  7. Connect the mode and temperature cables to the HVAC control assembly.
  8.  
  9. Connect the HVAC control assembly electrical connectors.
  10.  
  11. Place the radio in the vehicle and connect the radio electrical connectors.
  12.  
  13. Push the radio into position and tighten the screws.
  14.  
  15. Connect the accessory trim plate electrical connector(s).
  16.  
  17. Align the retaining fasteners with the instrument panel.
  18.  
  19. Push on the outer edge of the accessory trim plate in order to secure the retaining fasteners.
  20.  

 
label.common.footer.alt.autozoneLogo