ISUZU Amigo/Pick-ups/Rodeo/Trooper 1981-1996

Clutch Switch

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disengage the electrical connector.
  2.  
  3. Remove the lock nut and unscrew the switch.
  4.  

To install:
  1. Screw the new switch into position install lock nut, do not tighten the nut until adjustment is checked.
  2.  
  3. Make certain the pedal has been completely returned by the return spring.
  4.  
  5. Push the switch by hand until the pushrod cannot be seen from the tip portion of the switch.
  6.  
  7. Give the switch one reverse rotation turn and tighten the locknut.
  8.  
  9. Install the connector.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: The brake and clutch switches is model up under the dash on the pedal bracket

 
label.common.footer.alt.autozoneLogo