ISUZU Amigo/Pick-ups/Rodeo/Trooper 1981-1996

Injection Lines

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Use a back-up and flare nut wrench to remove the pump-to-injector nozzle lines. These lines may be damaged if the proper wrenches are not used. Wrap a shop rag around the fitting, then slowly turn the wrench to allow any residual fuel pressure to be relieved.
  4.  
  5. Remove the injection line.
  6.  

To install:
  1. Position the line in place, then thread the fitting on by hand.
  2.  
  3. Using a back-up and flare nut wrench, tighten the fittings until snug.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo