ISUZU Amigo/Pick-ups/Rodeo/Trooper 1981-1996

Striker Plate

Print

REMOVAL & INSTALLATION



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: Striker plate and hardware-except Hombre



Click image to see an enlarged view

Fig. Fig. 2: Striker plate and hardware-Hombre

  1. Scribe alignment marks around the striker plate.
  2.  
  3. Loosen and remove the striker plate retainer screws.
  4.  
  5. Remove the striker plate. Clean the mating surface between the striker plate and vehicle pillar.
  6.  

To install:
  1. Position the striker plate within the scribe marks and install the retainer screws. Tighten the screws to 10 ft. lbs. (13 Nm).
  2.  
  3. Close the door slowly and check to alignment. Do not slam to door.
  4.  
  5. Align the striker plate if needed.
  6.  

 
label.common.footer.alt.autozoneLogo