ISUZU Amigo/Pick-ups/Rodeo/Trooper 1981-1996

Speedometer

Print

REMOVAL & INSTALLATION



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: Remove the speedometer and vehicle speed sensor assembly-1994 Trooper shown



Click image to see an enlarged view

Fig. Fig. 2: The speedometer assembly is attached to the instrument cluster by several screws-1994 Trooper shown

  1. Disconnect the negative (-) battery cable.
  2.  
  3. Remove the instrument cluster from the vehicle as outlined in this section.
  4.  
  5. Remove the housing retaining screws or release the cluster cover snaps. Be careful not to damage the cluster cover during removal.
  6.  
  7. Remove the speedometer assembly from the cluster housing.
  8.  

To install:
  1. Install the speedometer assembly into the cluster housing.
  2.  
  3. Install the cluster cover to the housing and tighten retaining screws, if so equipped.
  4.  
  5. Install the cluster assembly into the vehicle as outlined in this section.
  6.  
  7. Connect the battery cable and check operation.
  8.  

 
label.common.footer.alt.autozoneLogo