Infiniti Car 1998-05

Disarming the System

Print


NOTE
All Air Bag electrical wiring harnesses and connectors are covered with YELLOW outer insulation. Do not use electrical test equipment on any circuit related to the Air Bag sensors. When installing Air Bag components, always install with the arrow marks facing the front of the vehicle.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Turn the ignition switch to theOFF
  4.  
  5. Disconnect both battery cables starting with the negative cable first and wait at least 10 minutes after the cables are disconnected. Be sure to insulate the battery terminal ends.
  6.  


NOTE
All Air Bag electrical wiring harnesses and connectors are covered with YELLOW outer insulation. Do not use electrical test equipment on any circuit related to the Air Bag sensors. When installing Air Bag components, always install with the arrow marks facing the front of the vehicle.

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Turn the ignition switch to the OFF position.
  4.  
  5. Disconnect both battery cables starting with the negative cable first and wait at least 10 minutes after the cables are disconnected. Be sure to insulate the battery terminal ends.
  6.  


NOTE
All Air Bag electrical wiring harnesses and connectors are covered with YELLOW outer insulation. Do not use electrical test equipment on any circuit related to the Air Bag sensors. When installing Air Bag components, always install with the arrow marks facing the front of the vehicle.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Turn the ignition switch to the OFF position.
  4.  
  5. Disconnect both battery cables starting with the negative cable first and wait at least 10 minutes after the cables are disconnected. Be sure to insulate the battery terminal ends.
  6.  

 
label.common.footer.alt.autozoneLogo