Infiniti Car 1998-05

Bleeding the Brake System

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    While bleeding the brake system, pay attention to the master cylinder fluid level.

  2.  
  3. Turn the ignition switch OFF and disconnect the ABS actuator and electric unit (control unit) connector or negative battery cable, if equipped with ABS.
  4.  
  5. Raise and safely support the vehicle.
  6.  
  7. Attach a vinyl tube to the right, rear bleeder valve.
  8.  
  9. Depress the brake pedal fully 4 or 5 times.
  10.  
  11. With the brake pedal depressed, loosen the bleeder valve to let the air out, then tighten it immediately.
  12.  
  13. Repeat steps 3 and 4 until no more air comes out.
  14.  
  15. Tighten the bleeder valve.
  16.  
  17. Fill the master cylinder reservoir.
  18.  
  19. Repeat the above steps for the left front, left rear, and the right front calipers, in that order.
  20.  

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    While bleeding the brake system, pay attention to the master cylinder fluid level.

  2.  
  3. Turn the ignition switch OFF and disconnect the VDC actuator connectors or negative battery cable.
  4.  
  5. Raise and safely support the vehicle.
    NOTE
    Bleed air in the following order, right rear, left front, left rear and right front.

  6.  
  7. Attach a vinyl tube to the right, rear bleeder valve.
  8.  
  9. Depress the brake pedal fully 4 or 5 times.
  10.  
  11. With the brake pedal depressed, loosen the bleeder valve to let the air out, then tighten it immediately.
  12.  
  13. Repeat steps 3 and 4 until no more air comes out.
  14.  
  15. Tighten the bleeder valve.
  16.  
  17. Fill the master cylinder reservoir.
  18.  

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    While bleeding the brake system, pay attention to the master cylinder fluid level.

  2.  
  3. Turn the ignition switch OFF and disconnect the ABS actuator and electric unit (control unit) connector or negative battery cable, if equipped with ABS.
  4.  
  5. Raise and safely support the vehicle.
  6.  
  7. Attach a vinyl tube to the right, rear bleeder valve.
  8.  
  9. Depress the brake pedal fully 4 or 5 times.
  10.  
  11. With the brake pedal depressed, loosen the bleeder valve to let the air out, then tighten it immediately.
  12.  
  13. Repeat steps 3 and 4 until no more air comes out.
  14.  
  15. Tighten the bleeder valve.
  16.  
  17. Fill the master cylinder reservoir.
  18.  
  19. Repeat the above steps for the left front, left rear, and the right front calipers, in that order.
  20.  

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    While bleeding the brake system, pay attention to the master cylinder fluid level.

  2.  
  3. Turn the ignition switch OFF and disconnect the ABS actuator and electric unit (control unit) connector or negative battery cable, if equipped with ABS.
  4.  
  5. Raise and safely support the vehicle.
  6.  
  7. Attach a vinyl tube to the right, rear bleeder valve.
  8.  
  9. Depress the brake pedal fully 4 or 5 times.
  10.  
  11. With the brake pedal depressed, loosen the bleeder valve to let the air out, then tighten it immediately.
  12.  
  13. Repeat steps 3 and 4 until no more air comes out.
  14.  
  15. Tighten the bleeder valve.
  16.  
  17. Fill the master cylinder reservoir.
  18.  
  19. Repeat the above steps for the left front, left rear, and the right front calipers, in that order.
  20.  

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    While bleeding the brake system, pay attention to the master cylinder fluid level.

  2.  
  3. Turn the ignition switch OFF.
  4.  
  5. Raise and safely support the vehicle.
  6.  
  7. Attach a vinyl tube to the right, rear bleeder valve.
  8.  
  9. Depress the brake pedal fully 4 or 5 times.
  10.  
  11. With the brake pedal depressed, loosen the bleeder valve to let the air out, then tighten it immediately.
  12.  
  13. Repeat steps 3 and 4 until no more air comes out.
  14.  
  15. Tighten the bleeder valve.
  16.  
  17. Fill the master cylinder reservoir.
  18.  
  19. Repeat the above steps for the left front, left rear, and the right front calipers, in that order.
  20.  

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    While bleeding the brake system, pay attention to the master cylinder fluid level.

  2.  
  3. Turn the ignition switch OFF and disconnect the VDC actuator connector or negative battery cable.
  4.  
  5. Raise and safely support the vehicle.
  6.  
  7. Attach a vinyl tube to the right, rear bleeder valve.
  8.  
  9. Depress the brake pedal fully 4 or 5 times.
  10.  
  11. With the brake pedal depressed, loosen the bleeder valve to let the air out, then tighten it immediately.
  12.  
  13. Repeat steps 3 and 4 until no more air comes out.
  14.  
  15. Tighten the bleeder valve.
  16.  
  17. Fill the master cylinder reservoir.
  18.  
  19. Repeat the above steps for the left front, left rear, and the right front calipers, in that order.
  20.  

 
label.common.footer.alt.autozoneLogo