Infiniti Car 1998-05

Removal & Installation

Print

4.1L Engine



Crankshaft Driven Type

NOTE
Never remove the radiator cap when the engine is hot. Serious burns could occur from high-pressure engine coolant escaping from the radiator.

  1. Be sure the engine is cold.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the air duct (inlet), as required.
  6.  
  7. Remove the radiator shroud.
  8.  
  9. Remove the drive belt.
  10.  
  11. Remove the cooling fan retaining bolts.
  12.  
  13. Remove the cooling fan from its mounting.
  14.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Be sure to install the fan with its front mark -F- facing the front of the engine.
  4.  
  5. Be sure to refill the cooling using the proper grade and type engine coolant.
  6.  
  7. Start the engine and check for leaks.
  8.  
  9. Start the engine and allow it to reach operation temperature. Recheck the coolant level, fill as required.

    Click image to see an enlarged view

    Fig. Crankshaft driven type fan and related components-4.1L engine

  10.  

Motor Driven Type

NOTE
Never remove the radiator cap when the engine is hot. Serious burns could occur from high-pressure engine coolant escaping from the radiator.

  1. Be sure the engine is cold.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Disconnect the harness connector from the fan motor.
  6.  
  7. Remove the fan assembly retaining bolts.
  8.  
  9. Remove the fan assembly from the vehicle.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Be sure to refill the cooling using the proper grade and type engine coolant.
  4.  
  5. Start the engine and check for leaks.
  6.  
  7. Start the engine and allow it to reach operation temperature. Recheck the coolant level, fill as required.

    Click image to see an enlarged view

    Fig. Motor driven type fan and related components-4.1L engine

  8.  

 
label.common.footer.alt.autozoneLogo