Infiniti Car 1998-05

Flywheel

Print

Removal & Installation



2.0L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the transmission.
  4.  
  5. Remove the flywheel retaining bolts.
  6.  
  7. Remove the flywheel from the engine.
  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

3.5L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the transmission.
  4.  
  5. Remove the flywheel retaining bolts.
  6.  
  7. Remove the flywheel from the engine.
  8.  

To install:

  1. When installing the flywheel be sure to correctly align the crankshaft side guide pin and drive side guide pin hole.
    NOTE
    There is a mating mark on the clutch cover side of the flywheel.

  2.  
  3. Install the flywheel and reinforcement plate, as shown in the illustration.
  4.  
  5. Hold the ring gear with the ring gear stopper.
  6.  
  7. Tighten the mounting bolts to specification and in a crosswise sequence in several passes.
  8.  
  9. Continue the installation in the reverse order of the removal procedure.

    Click image to see an enlarged view

    Fig. Flywheel alignment and related components-G35

  10.  

 
label.common.footer.alt.autozoneLogo