Infiniti Car 1998-05

Antenna

Print

Power Antenna



Antenna Motor
Removal & Installation
G20


Click image to see an enlarged view

Fig. Power antenna wiring schematic-G20



Click image to see an enlarged view

Fig. Power antenna location (type one)-G20



Click image to see an enlarged view

Fig. Power antenna and related components (type two)-G20

Type Two
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the antenna nut and base.
  6.  
  7. Withdraw the antenna rod while raising it, by operating the antenna motor.
  8.  

To install:

  1. Lower the antenna rod by operating the antenna motor.
  2.  
  3. Insert the gear section of the antenna rope into place with it facing toward the antenna motor.
  4.  
  5. As soon as the antenna rope is wound on the antenna motor, stop the antenna motor.
  6.  
  7. Insert the antenna rod lower end into the antenna motor pipe.
  8.  
  9. Retract the antenna completely by operating the antenna motor.
  10.  
  11. Install the antenna nut and base. Tighten the nut to 17-34 ft. lbs.
  12.  

G35


Click image to see an enlarged view

Fig. Power antenna location-G35



Click image to see an enlarged view

Fig. Power antenna wiring schematic sedan with sunroof-G35



Click image to see an enlarged view

Fig. Power antenna wiring schematic sedan without sunroof-G35



Click image to see an enlarged view

Fig. Power antenna wiring schematic coupe-G35

I30


Click image to see an enlarged view

Fig. Power antenna location (type one)-1998-1999 I30



Click image to see an enlarged view

Fig. Power antenna location (type two)-1998-1999 I30



Click image to see an enlarged view

Fig. Power antenna removal (type two)-1998-1999 I30



Click image to see an enlarged view

Fig. Power antenna installation (type two)-1998-1999 I30



Click image to see an enlarged view

Fig. Power antenna location-2000-2001 I30



Click image to see an enlarged view

Fig. Power antenna wiring schematic-2000-2001 I30

Type Two
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the antenna nut and base.
  6.  
  7. Withdraw the antenna rod while raising it, by operating the antenna motor.
  8.  

To install:

  1. Lower the antenna rod by operating the antenna motor.
  2.  
  3. Insert the gear section of the antenna rope into place with it facing toward the antenna motor.
  4.  
  5. As soon as the antenna rope is wound on the antenna motor, stop the antenna motor.
  6.  
  7. Insert the antenna rod lower end into the antenna motor pipe.
  8.  
  9. Retract the antenna completely by operating the antenna motor.
  10.  
  11. Install the antenna nut and base. Tighten the nut to 17-34 ft. lbs.
  12.  

I35


Click image to see an enlarged view

Fig. Power antenna location-I35



Click image to see an enlarged view

Fig. Power antenna wiring schematic-I35

M45


Click image to see an enlarged view

Fig. Power antenna location-M45



Click image to see an enlarged view

Fig. Power antenna wiring schematic-M45

Q45
1998-2001


Click image to see an enlarged view

Fig. Power antenna location-1998-2001 Q45



Click image to see an enlarged view

Fig. Power antenna wiring schematic-1998-2001 Q45

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the antenna nut and base.
  6.  
  7. Withdraw the antenna rod while raising it, by operating the antenna motor.
  8.  

To install:

Click image to see an enlarged view

Fig. Power antenna and related components-1998-2001 Q45



Click image to see an enlarged view

Fig. Power antenna removal-1998-2001 Q45



Click image to see an enlarged view

Fig. Power antenna installation-1998-2001 Q45

  1. Lower the antenna rod by operating the antenna motor.
  2.  
  3. Insert the gear section of the antenna rope into place with it facing toward the antenna motor.
  4.  
  5. As soon as the antenna rope is wound on the antenna motor, stop the antenna motor.
  6.  
  7. Insert the antenna rod lower end into the antenna motor pipe.
  8.  
  9. Retract the antenna completely by operating the antenna motor.
  10.  
  11. Install the antenna nut and base. Tighten the nut to 17-34 ft. lbs.
  12.  

2002-2005


Click image to see an enlarged view

Fig. Power antenna location-2002-2005 Q45



Click image to see an enlarged view

Fig. Power antenna wiring schematic-2002-2005 Q45

 
label.common.footer.alt.autozoneLogo