Infiniti Car 1998-05

Removal & Installation

Print

G35



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the blower unit.
  6.  
  7. Remove the mounting screws.
  8.  
  9. Disconnect the mode door connector.
  10.  
  11. Remove the component from its mounting.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

M45



Drivers Side
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the instrument panel.
  6.  
  7. Disconnect the mode door motor connector.
  8.  
  9. Remove the mounting screws.
  10.  
  11. Remove the component from its mounting.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

Passengers Side
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the blower unit.
  6.  
  7. Disconnect the mode door motor connector.
  8.  
  9. Remove the mounting screws.
  10.  
  11. Remove the component from its mounting.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

Q45



2002-2005 (Drivers Side)
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the lower driver-s side instrument panel.
  6.  
  7. Remove the ventilator duct.
  8.  
  9. Disconnect the mode door motor connector.
  10.  
  11. Remove the mounting screws.
  12.  
  13. Remove the component from its mounting.
  14.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

2002-2005 (Passengers Side)
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the blower unit.
  6.  
  7. Disconnect the mode door motor connector.
  8.  
  9. Remove the mounting screws.
  10.  
  11. Remove the component from its mounting.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo