Infiniti Car 1998-05

Parking Brake Shoes

Print

Removal & Installation





Click image to see an enlarged view

Fig. Parking brake shoe and related components-G35

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the tire and wheel assembly.
    NOTE
    When removing the rotor put matchmarks on both the rotor and wheel hub.

  6.  
  7. Remove the rotor with the parking brake lever/pedal completely returned.
  8.  
  9. Remove the parking brake shoes (refer to the illustration).
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
    NOTE
    The orientation of the adjuster is different for the left and right sides. Refer to the illustration for proper installation



    Click image to see an enlarged view

    Fig. Parking brake shoe adjuster identification-G35 and M45

  2.  
  3. Adjust the parking brake.
  4.  



Click image to see an enlarged view

Fig. Parking brake shoe and related components-M45

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the tire and wheel assembly.
    NOTE
    When removing the rotor put matchmarks on both the rotor and wheel hub.

  6.  
  7. Remove the rotor with the parking brake lever/pedal completely returned.
  8.  
  9. Remove the parking brake shoes (refer to the illustration).
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
    NOTE
    The orientation of the adjuster is different for the left and right sides. Refer to the illustration for proper installation

  2.  
  3. Adjust the parking brake.
  4.  



Click image to see an enlarged view

Fig. Parking brake shoe and related components-1998-2001 Q45



Click image to see an enlarged view

Fig. Parking brake shoe and related components-2002-2005 Q45



Click image to see an enlarged view

Fig. Parking brake shoe removal locating points-1998-2001 Q45

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the tire and wheel assembly.
  6.  
  7. Remove the torque tube member retaining bolts (rear disc brake assembly retaining bolts).
  8.  
  9. Remove the caliper and position it to the side. Do not disconnect the fluid line.
  10.  
  11. Release the parking brake lever. Remove the drum.
  12.  
  13. Remove the spring by rotating the shoes. Remove the adjuster.
  14.  
  15. Disconnect the parking brake cable from the toggle lever after drawing out the toggle lever pin.
  16.  

To install:

  1. Installation is the reverse of the removal procedure.
    NOTE
    The orientation of the adjuster is different for the left and right sides. Refer to the illustration for proper installation



    Click image to see an enlarged view

    Fig. Parking brake shoe adjuster identification-1998-2001 Q45

  2.  
  3. Adjust the parking brake.
  4.  

 
label.common.footer.alt.autozoneLogo