Log In
Search suggestions

    My Vehicles

    1997 Volkswagen Golf 2.0L SFI 4cyl

    My Store

    1720 S RIDGEWOOD A
    (386) 427-1210

    CLOSED Open tomorrow at 7:30 AM

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIFTME

    See Details

    Infiniti Car 1998-05

    Removal & Installation

    Print



    Click image to see an enlarged view

    Fig. Power steering pump and related components-G20 (2001-2002 shown)

    1. Before servicing the vehicle, refer to the Precautions section.
    2.  
    3. Disconnect the negative battery cable.
    4.  
    5. Remove the necessary components in order to gain access to the power steering pump assembly.
    6.  
    7. Remove the drive belt.
    8.  
    9. Drain the power steering fluid at the pump. Disconnect and plug the fluid lines.
    10.  
    11. Remove the power steering pump retaining bolts. Remove the pump from the vehicle.
    12.  

    To install:

    1. Installation is the reverse of the removal procedure.
    2.  
    3. Bleed the power steering system.
    4.  
    5. Adjust the belt tension, as required.
    6.  



    Click image to see an enlarged view

    Fig. Power steering pump and related components-G35

    1. Before servicing the vehicle, refer to the Precautions section.
    2.  
    3. Disconnect the negative battery cable.
    4.  
    5. Remove the engine cover.
    6.  
    7. Remove the air cleaner box.
    8.  
    9. Drain the coolant from the upper radiator tank. Remove the upper radiator hose.
      NOTE
      Be sure to properly dispose of used coolant.

    10.  
    11. Remove the radiator shroud.
    12.  
    13. Loosen the idler pulley and remove the belt.
    14.  
    15. Drain the power steering fluid.
    16.  
    17. Disconnect and plug the power steering hose lines.
    18.  
    19. Remove the bolt common to the water pump and power steering pump.
    20.  
    21. Remove the bolt and then the power steering pump.
    22.  

    To install:

    1. Installation is the reverse of the removal procedure.
    2.  
    3. Bleed the power steering system.
    4.  
    5. Adjust the belt tension, as required.
    6.  



    Click image to see an enlarged view

    Fig. Power steering pump and related components-I30

    1. Before servicing the vehicle, refer to the Precautions section.
    2.  
    3. Disconnect the negative battery cable.
    4.  
    5. Remove the necessary components in order to gain access to the power steering pump assembly.
    6.  
    7. Remove the drive belt.
    8.  
    9. Drain the power steering fluid at the pump. Disconnect and plug the fluid lines.
    10.  
    11. Remove the power steering pump retaining bolts. Remove the pump from the vehicle.
    12.  

    To install:

    1. Installation is the reverse of the removal procedure.
    2.  
    3. Bleed the power steering system.
    4.  
    5. Adjust the belt tension, as required.
    6.  



    Click image to see an enlarged view

    Fig. Power steering pump and related components-I35

    1. Before servicing the vehicle, refer to the Precautions section.
    2.  
    3. Disconnect the negative battery cable.
    4.  
    5. Remove the necessary components in order to gain access to the power steering pump assembly.
    6.  
    7. Remove the drive belt.
    8.  
    9. Drain the power steering fluid at the pump. Disconnect and plug the fluid lines.
    10.  
    11. Remove the power steering pump retaining bolts. Remove the pump from the vehicle.
    12.  

    To install:

    1. Installation is the reverse of the removal procedure.
    2.  
    3. Bleed the power steering system.
    4.  
    5. Adjust the belt tension, as required.
    6.  



    Click image to see an enlarged view

    Fig. Power steering pump and related components-M45

    1. Before servicing the vehicle, refer to the Precautions section.
    2.  
    3. Disconnect the negative battery cable.
    4.  
    5. Remove the necessary components in order to gain access to the power steering pump assembly.
    6.  
    7. Remove the drive belt.
    8.  
    9. Drain the power steering fluid at the pump. Disconnect and plug the fluid lines.
    10.  
    11. Remove the power steering pump retaining bolts. Remove the pump from the vehicle.
    12.  

    To install:

    1. Installation is the reverse of the removal procedure.
    2.  
    3. Bleed the power steering system.
    4.  
    5. Adjust the belt tension, as required.
    6.  



    Click image to see an enlarged view

    Fig. Power steering pump and related components-2002-2005 Q45

    1. Before servicing the vehicle, refer to the Precautions section.
    2.  
    3. Disconnect the negative battery cable.
    4.  
    5. Remove the battery.
    6.  
    7. Drain the cooling system low enough to remove the reservoir tank. Remove the reservoir tank.
    8.  
    9. Loosen the adjusting screw and bolts for the pump attaching bracket. Remove the drive belt.
    10.  
    11. Remove the pump from the vehicle.
    12.  

    To install:

    1. Installation is the reverse of the removal procedure.
    2.  
    3. Bleed the power steering system.
    4.  
    5. Adjust the belt tension, as required.
    6.  

     
    AutoZone Logo