Infiniti Car 1998-05

Brake Disc (Rotor)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the tire and wheel assembly.
  6.  
  7. Remove the union bolts and torque member bolts, and remove the brake caliper assembly from the vehicle.
    NOTE
    Position the assembly to the side. Do not allow the caliper to hang by the brake line. Do not disconnect the brake line from the caliper

  8.  
  9. Remove the rotor.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and support the vehicle safely. Remove the rear wheels.
  4.  
  5. Remove the parking brake cable stay fixing bolt and the lock spring.
  6.  
  7. Remove the guide pin bolts and remove the caliper. Position it to the side using mechanics wire, or something suitable. Do not disconnect the brake hose.
  8.  
  9. Remove the rotor.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the rear wheels.
  4.  
  5. Remove the guide pin bolts and remove the caliper. Position it to the side using mechanics wire, or something suitable. Do not disconnect the brake hose.
  6.  
  7. Remove the rotor.
  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the rear wheels.
  4.  
  5. Remove the guide pin bolts and remove the caliper. Position it to the side using mechanics wire, or something suitable. Do not disconnect the brake hose.
  6.  
  7. Remove the rotor.
  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the rear wheels.
  4.  
  5. Remove the torque member mounting bolts and remove the caliper assembly.
  6.  
  7. Position it to the side. Do not disconnect the brake fluid line. Do not hang the caliper by the brake line.
  8.  
  9. Remove the rotor.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Fit the caliper over the rotor and install the mounting bolts.
  4.  
  5. Install the rear wheels and lower the vehicle to the floor.
  6.  

With Standard Brakes
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and support the vehicle safely. Remove the rear wheels.
  4.  
  5. Remove the parking brake cable stay fixing bolt and the lock spring.
  6.  
  7. Remove the guide pin bolts and position the caliper to the side. Do not disconnect the brake hose.
  8.  
  9. Remove the rotor.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo