Infiniti Car 1998-05

Stabilizer Bar (Sway Bar)

Print

Removal & Installation



  1. Remove dynamic damper of exhaust tube.
  2.  
  3. Remove lower side fixing nut on stabilizer connecting rod and remove stabilizer connecting rod from stabilizer bar with power tool.
  4.  
  5. Remove fixing nut on stabilizer clamp and remove stabilizer from vehicle with power tool.
  6.  
  7. Check stabilizer bar, stabilizer bushings, stabilizer clamp, stabilizer connecting rod, stabilizer connecting rod mounting bracket for any deformation, crack or damage. Replace if necessary.
  8.  

To install:

  1. Refer to the exploded view for tightening torque. Install in the reverse order of removal.
    NOTE
    Do not reuse non-reusable parts.

  2.  
  3. The stabilizer bar uses pillow ball type connecting rod, position ball joint with case on pillow ball head parallel to stabilizer bar.
  4.  

  1. Remove dynamic dampener of exhaust tube.
  2.  
  3. Remove stabilizer connecting rod from stabilizer bar with power tool.
  4.  
  5. Remove mounting bolts of stabilizer clamp and then remove stabilizer clamp and stabilizer bushing from stabilizer bar with power tool.
  6.  
  7. Remove stabilizer bar from vehicle behind.
  8.  
  9. Check stabilizer bar, stabilizer bushing, stabilizer clamp, stabilizer connecting rod, stabilizer connecting rod mounting bracket for any deformation, crack or damage. Replace if necessary.
  10.  

To install:

  1. Refer to the exploded view for tightening torques. Install in the reverse order of removal.
    NOTE
    Refer to component parts location and do not reuse non-reusable parts.

  2.  
  3. Stabilizer bar uses the pillow ball type connecting rod, position ball joint with case on pillow ball head parallel to stabilizer bar.
  4.  

  1. Remove center muffler.
  2.  
  3. Remove stabilizer connecting rod from stabilizer bar with a power tool.
  4.  
  5. Remove mounting bolts of stabilizer clamp and then remove stabilizer clamp and stabilizer bushing from stabilizer bar.
  6.  
  7. Remove stabilizer bar from vehicle behind.
  8.  
  9. Check stabilizer bar, stabilizer bushings, stabilizer clamp, stabilizer connecting rod, stabilizer connecting rod mounting bracket for any deformation, cracks or damage. Replace if there are.
  10.  

To install:

  1. Refer to the exploded view for tightening torque. Install in the reverse order of removal.
    NOTE
    Do not reuse non-reusable parts.

  2.  
  3. The stabilizer bar uses pillow ball type connecting rod.
  4.  

 
label.common.footer.alt.autozoneLogo