Infiniti Car 1998-05

Upper Control Arms

Print

Removal & Installation



For all models except the G35 and M45, refer to the Strut removal and installation procedure for coil spring replacement.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Tire and wheel
     

  4.  
  5. Place a jack under the rear lower link.
  6.  
  7. Loosen the fixing bolt and nut attaching the rear lower line to the side of the suspension member.

    Fixing bolt and nut from the side of the axle housing
     

  8.  
  9. Slowly lower the jack, then remove the upper rubber seat, coil spring and rubber sheet from the lower link.

    Fixing bolt and nut from the side of the suspension member to remove the lower link.
     

  10.  
  11. Installation is the reverse of the removal procedure. Tighten all components, as listed in the rear suspension illustration.
  12.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Tire and wheel
     

  4.  
  5. Place a jack under the rear lower link.
  6.  
  7. Loosen the fixing bolt and nut attaching the rear lower link to the side of the suspension member.

    Fixing bolt and nut from the side of the axle housing
     

  8.  
  9. Slowly lower the jack, then remove the upper rubber seat, coil spring and rubber sheet from the lower link.

    Fixing bolt and nut from the side of the suspension member to remove the lower link.
     

  10.  
  11. Installation is the reverse of the removal procedure. Tighten all components, as listed in the rear suspension illustration.
  12.  

 
label.common.footer.alt.autozoneLogo