Infinity_QX4_1998-2003

Fuel Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove the or disconnect the following:

    Negative battery cable
     
    Access panel behind the rear seat
     
    Fuel lines
     
    Fuel pump and gauge harness connectors
     
    Fuel gauge sender
     
    Fuel pump
     

  6.  

To install:

  1. Install or connect the following:

    Fuel pump
     
    Fuel gauge sender. Tighten the screws to 17 - 23 inch lbs. (2.0 - 2.5 Nm).
     
    Fuel pump and gauge harness connectors
     
    Fuel lines
     
    Access panel
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

 
label.common.footer.alt.autozoneLogo